Hi! I bought a water temp, volts, and oil pressure gauge for under the dash. I think the water and volts are straight forward, but two questions for the oil gauge:
1. Where to I connect the little nylon hose and fitting.... there's what looks like an electric sending unit I think on the oil filter housing. Is that the place?
2. Do I need to drain the oil first?
Thx in advance!
I bought the copper pipe kit and the nylon kit. Both gave me grief. The copper one is slightly better. The nylon one kept leaking. The copper one would not seat the second time I installed it.
There is a steel fitting from your pipe kit that attaches to the oil filter adapter. Remove the your old electric sending unit and attach the new fitting for the nylon pipe. Attach the other fitting from kit to the gauge. Install pipe to gauge adapter.
