well just as I thought,I took Off the Intake and valley cover off tonight and my hunch was right,the rear of my valley pan was leaking,running out the back threw the bellhousing and making it look like the rear main or oil pan was leaking.I dont have a roller cam,just your stock lifters so my question is should I use my o.e.m. valley pan that has the baffle or stay with the butler aluminum,using the cork gasket they sent me and use THE RIGHT STUFF sealer on It.what do you think,?also would you use the stock type mr.gasket intake gaskets or the felpro superseal and do you always put a little around the rubber o-ring. thanks