Mine's a 68, I don't know if they are the same as a 67 but I took a few pics. If it quits raining and warms up a bit today or tomorrow, I'll take it outside in the daylight and maybe I can get some better shots. Hole is 1-15/16" X 1-3/4". The opening on the driver's side is just folded up 90 degrees but the passenger side is rolled to accept the latch. May have to weld a piece of rod or a cut off bolt in there is yours is missing. Speaking of which, my buddie with a 67 had the hood fly up at 60 MPH, seems the 67 latches were latched or not but the 68s had a secondary latch to stop them from flying open. He changed his 67 out for a 68 latch. Just thought I'd add that in case you may find it interesting.