Forums

First Generation Firebird Forums Tech Help General Shield - Starter Motor Wire, Which Bolt Hole?

Print Thread

Rate Thread

Shield - Starter Motor Wire, Which Bolt Hole? #324127 10/01/19 05:55 PM
Joined: Dec 2011 Posts: 47 Michigan M MarkfromMich Member
MarkfromMich Member M Joined: Dec 2011 Posts: 47 Michigan	Please see attachments. Does the bolt go in hole "A" as per the drawing? Because on my '69 Firebird, the bolt is in the hole that I labeled "B" on the drawing. I think if I moved the bolt to hole "A", then the curved part of the shield would interfere with the block or the exhaust manifold. If you have a pic, please post. Any help appreciated. Attached PDF document Shield Starter Motor Wire.pdf (42.91 KB, 74 downloads)

Google AdSence Sponsor for FGF Forums

Entire Thread
Subject	Posted By	Posted
Shield - Starter Motor Wire, Which Bolt Hole?	MarkfromMich	10/01/19 09:55 PM
Re: Shield - Starter Motor Wire, Which Bolt Hole?	USMC_Ordy	10/02/19 08:43 AM

Hop To

Link Copied to Clipboard

Forum Statistics

Forums57

Topics35,418

Posts298,407

Members8,800

Most Online1,983
Jul 27th, 2024