I tried the Moog springs and they were too tall. Ended up with the Eatons, gave my car a nice stance IMO. Quality wise they are probably both the same, Eaton will give you the specs, their springs are I believe $50-60 more. Pay attention and mark the originals as orientation will affect ride height. Also if the factory added cushions you might have to reuse them to keep side to side equal. Plan on leaving your tools "out" after install, cause you may have to redo things a few times to your own personal preference and liking. One more thing...remember to lean on the front bumper and push down a few times to get the new springs to seat before judging the ride height.