I did not set the gap on the new high flow water pump. I wish I knew about that before I put it in, otherwise I would've at least checked it. Part of me doubts this is the issue because the car ran hot before I installed the high flow pump but it could be a part of the problem.

The car has a vintage air AC unit installed but I rarely run it due to overheating. I was under the impression that it wouldn't have much of an affect on the cooling system when its not running because the compressor is engaged via a clutch.

The bottom baffle is in place as well as the upper baffles that tie the radiator mount to the front bumper assembly. I do not have those seals that fill in the gaps around the radiator