Did some digging. Have some questions but aint figured out how to post pics.
Followed red wire (12ga?) thru a small hole in the rad support over to the drivers side, thru another small hole, to what I think is the distribution box. There is an open male spade on the box w/a red/black butt connected wire that seems like it "might" go there. Any idea? [img]https://i.imgur.com/bRFyZag.jpg[/img]
Prior owner had installed dist box to where the tab was not in the appropriate hole that would prevent movement. The black wire w/a screw, the connector(metal) was touching the metal windshield washer bottle holder. I reinstalled it in its proper place after cleaning connections best I could.
Distributor is a pertronix HEI. As you know, needs 12v. It's tied into 2 wires that go to the firewall, all under tape. Circuit = keyed hot. Red wire goes to dizzy. White and purple(?) wire go to firewall harness. [img]https://i.imgur.com/aOrPIKe.jpg[/img]
