I was finally able to pull the pistons out of the block and, this thing is going to need to be bored out. Number 2 was stuck in there pretty bad with all that rusty gunk on the cylinder walls. The engine has already been bored 30 over so its probably going to need it again unfortunately. So that means she'll have to sit wrapped up for a while until i can afford the rebuild. I found a reputable machine shop in town that i need to send pics over to him to confirm that it'll need to be bored out.

Another topic though, when i bought my bird there was a quadrajet in the trunk. Apparently the guy i purchased the car from was tracking down a fuel issue so he did a rebuild on the carb, then bought and installed an Edlebrock, then finally replaced the whole fuel system. I did some research on it last night and its a 7027262 carb so its a 67 Pontiac automatic carb. Beings my bird is a manual, will this carb work on the 350 i have in the bird now? If i don't use is, what's it worth?

Thanks guys!