I have a 67 with a 326 manual transmission. I recently removed my starter to adjust my clutch fork adjustment rod. when I reinstalled the starter, my car has no power at the ignition switch. Nothing works, the lights or ignition. I only have the main power from the battery and the purple wire connected on the S terminal of the solenoid. The main battery cable does have 12.68 v, but the S terminal and the R terminal on the solenoid do not have any power. The seems wrong, should the S terminal have 12v on it and it goes to the switch? I think the purple wire is the main power coming into the dash. Could the solenoid be short out? Can I replace the solinoid or do I have to replace the entire starter?
