Yours looks like the one for full gauges. Do you have those? If so go buy a lottery ticket because you are super lucky. Look on page 15-11 and you will find it under accessories. But the turn indicator spots will be the same unless they lumped them all on one side. That could explain the issue. The bulb holes are the bottom most openings. Follow the circuits up to the connector. Brian, if you have the factory gauge set, you are golden. Even re-pops are super expensive. Let me search a bit more. EDIT: looks like on the factory gauge pod they put the blinkers at the bottom of the speedometer. So your bulbs are the two outer of those three cavities under where the speedo cable attaches. I think the middle one is the brake warning light. If so the connector cavities would be from left to right bottom: #4 and #6. If the gauge printed circuit is being used with the normal idiot light pod, only one blinker would work.