|
|
|
|
Joined: Dec 2022
Posts: 489 Likes: 11
Member
|
|
Member
Joined: Dec 2022
Posts: 489 Likes: 11 |
Do you know how to re-pin the connectors? At the end of the wire is a fitting that has a tiny bent-up section. It locks into the plastic connector so it can't back out. To release it you insert a tiny tool like a jeweler's screwdriver from the open side while pushing the wire forward. That presses the bent part down and the wire will slide out rearward. To re-insert it you must re-bend that part back up or the wire will not stay put.
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,862
| |
Most Online19,810 Feb 1st, 2026
|
|
|
0 members (),
2,192
guests, and
74
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|