1. What was the purpose of the cocktail shakers? A: they are vibration dampeners, some cars do not seem to have vibration problems , but most do... 2. Were there [censored] tail shakers both back and front? If front where located? A:Yes, one in ea corner...for front in the fender behind /front of battery and by the w/s water bottle. 3. Are there differences between the 68 and 67 cocktail shakers? (size or fit) A: not size , but possibly fit...the brackets are different on some models/front /rear ...I forget now which , or how they differ, some are same brackets..so 67,68,69 are different , front and rear, but some interchange...only brackets differe
4. What was the weight of the shakers? A: 25 lbs ea 5. Are the shakers made after market? A : No, you got to find from used parts house, used parts guy on this site* , or EBay , three best bets usually... *)check with Firebird Bill earlybrds@aol.com and Terry Ritter youjincho@prodigy.net
