The Headlight Do work. However, when I go to high beams only the High Beam Lights go on. I pulled the headlight bulbs and checked the connections. I DID find out in doing so that the loose double wire I mentioned earlier was the not connected to the Low Beam. I connected this wire and then BOTH Low and High beams went on ONly when I hit the high Beam button. Now, today for some reason I am back to just LOw or High. But lets not get away from the Tail light issue since I can not drive at night which is a problem.
My head lights do work, my instrument /Dash light has gone out, not sure if this is related. Could it be a Fuse???
Since I am going to be pulling the interior, would it be smart to install a new intermediate harness that feeds the trunk compartment?
