Yes. There's a trick. As long as you know that it's an adjustment problem and not worn out hinges. If it's the way yours are where the problem occured after an attempt at adjustment and they were good before, use this trick: Open hood. Loosen back hinge-to-fender bolts. Lift hood at front and have someone tighten back bolts while you are putting pressure up on front of hood. This will get the back hinge adjustment all the way down. Now, loosen front hing-to-fender bolts. Repeat the earlier procedure of lifting front of hood while someone tightens bolts. This will get the front hinge adjustment all the way up. It sounds backwards to have the hinge all the way up to correct a 'high' problem but that's the trick. The hinges will not fold up properly if you have both the front and the back all the way down.

EDIT Bob and I were typing at the same time. I see we have opposite instructions but with the same principle in mind. Try it one way and if that doesn't work try it the other. Let us know if either way helps. I could definitely be wrong but I think Bob and I have the answer.