Anyway, a buddy suggested some 6X heads milled to the cc I need for the compression I want to run. Question is, what heads exactly? I have a '75 intake, but I want to go with a unit that is a little better flowing. Am I going to have gasket matching issues? Dave
You can go several ways with the rebuild..
96 heads 96 cc chambers 9.2 to 1 with SRP 10-12 cc piston standard deck 455.
6X or 5C heads 6.7 cc piston. zero deck
Those 6X-8 have 112-114 cc chambers (455) or 98 cc 400
Why zero deck? Why spend $$$ on H beams. Resize stock rods with ARP bolts, you'll do just fine. Not like you are ripping up mad with an 87 cc low compression motor.
Si Vis Pacem Parabellum
1967 Starlight black PMD Engineering 400 Auto 1968 Alpine Blue 400 4 speed 1968 Verdoro Green 400 HO 4 speed 2013 1LE 2SS/RS Inferno Orange Camaro.
