Your cam is a good match for this combo for mostly street with some strip use, as the ramps are very aggressive for it's advertised duration. But as Claus said, you should be using 1.65 rockers.
However, if you plan to inject later on, that 110 lobe seperation angle (LSA) is going to make it difficult to get a clean map signal. For EFI you need more like a 114 LSA. Shoot for somewhere between 224 and 234 degrees intake and another 8 or more degrees longer duration on the exhaust. The Summit 2802 should get you there with 1.65 rockers. Keep that in mind for your next cam swap.
