Hello .. I have a center console from a donor car 1968 firebird convert. the console is going in my 67 camaro the burlwood trim peices i took off it are in real nice shape, i am not going to use them on the camaro and was wondering if anyone has a value that is resonable for a price to sell them for.Their is a ...end peice, center console door,long center peice , and the shifter plate that goes over it. A total of 4 peices. i haven't seen these peices in many of the cars that i've seen and was wondering if these were a option offered for the firebirds in 68. With out the metal burlwood peices its the same console for the 67 camaro...Right?

Thanks Chuck

Must be an automatic console? If it is for a manual I'm interested. PM me if the parts are for a manual. I think you are correct about the base peices being the same for a '67.

i need the rear end piece

i think the '67 camaro and firebird have the same console, but '68 '69 were different. firebirds for those 2 were wood grain look. rectangular hole for automatice. oval for stick shift

If you remove the chrome and burl, you will have a console with no compartment door, no ash tray or cover, and holes on the top where the top plate attached.

'67 Camaro and Firebird are the same and are reproduced. You can get enough by selling a nice burl console to just about cover a new console.

Yea, Vikki's right. You could make a good buck selling the console with the burlwood, then put that towards your Camaro console

Thanks I will probly sell the whole console and get a repop one . I will get some pics soon and post it on here first, rather see some one put it to good use. I have a bunch of parts to get rid of and i will post them soon also .
Thanks again for the advice.

Okay....