|
|
Joined: Jul 2011
Posts: 525
Member
|
|
Member
Joined: Jul 2011
Posts: 525 |
I've had my original Harrison fixed a couple times now. Time for a new radiator. I want to keep it an original 4-row copper/brass radiator.
Looking for recommendations on what's a good replacement and where to purchase?
It's a stock 67 400, auto, non-AC
Thanks
|
|
|
|
|
Joined: Jan 2009
Posts: 3,049 Likes: 10
Senior Member
|
|
Senior Member
Joined: Jan 2009
Posts: 3,049 Likes: 10 |
Find a place that will re-core it, keeping the original tanks.
Not that expensive.
-Jeff
|
|
|
|
|
Joined: Dec 2007
Posts: 10,337 Likes: 3
Premium Member
|
|
Premium Member
Joined: Dec 2007
Posts: 10,337 Likes: 3 |
Find a place that will re-core it, keeping the original tanks.
Not that expensive. Huge "agree" here...
I used to be indecisive. Now I'm not sure. I feel like I am diagonally parked in a parallel universe. 1968 400 convertible (Scarlet) 1976 T/A - 455 LE (No Burt) 1976 T/A New baby, starting full restoration. 1968 350 - 4 speed 'vert - 400 clone (the Beast!) 1968 350 convertible - Wife's car now- 400 clone (Aleutian Blue) (Blue Angel) 2008 Durango - DD 2008 GXP - New one from NH is AWESOME! 2017 Durango Citadel - Modern is nice! HEMI is amazing! 1998 Silverado Z71 - Father-daughter project 1968 400 coupe - R/A clone (Blue Pearl) (sold) 1967 326 convertible - Sold  1980 T/A SE Bandit - Sold
|
|
|
|
|
Joined: Jul 2011
Posts: 525
Member
|
|
Member
Joined: Jul 2011
Posts: 525 |
I have no intentions of getting rid of the original. But it's the tanks that keep leaking. I've had them repaired twice now. Reaches a point where enough is enough. I just want to drive the dam thing...
|
|
|
|
|
Joined: Dec 2007
Posts: 10,337 Likes: 3
Premium Member
|
|
Premium Member
Joined: Dec 2007
Posts: 10,337 Likes: 3 |
I have no intentions of getting rid of the original. But it's the tanks that keep leaking. I've had them repaired twice now. Reaches a point where enough is enough. I just want to drive the dam thing... Wow. I've had a couple repaired like this 8-10 years ago, with no issues. Must use better materials in MN. Humpf...
I used to be indecisive. Now I'm not sure. I feel like I am diagonally parked in a parallel universe. 1968 400 convertible (Scarlet) 1976 T/A - 455 LE (No Burt) 1976 T/A New baby, starting full restoration. 1968 350 - 4 speed 'vert - 400 clone (the Beast!) 1968 350 convertible - Wife's car now- 400 clone (Aleutian Blue) (Blue Angel) 2008 Durango - DD 2008 GXP - New one from NH is AWESOME! 2017 Durango Citadel - Modern is nice! HEMI is amazing! 1998 Silverado Z71 - Father-daughter project 1968 400 coupe - R/A clone (Blue Pearl) (sold) 1967 326 convertible - Sold 1980 T/A SE Bandit - Sold
|
|
|
|
|
Joined: Jul 2003
Posts: 4,248 Likes: 14
Premium Member
|
|
Premium Member
Joined: Jul 2003
Posts: 4,248 Likes: 14 |
I got the Desert Cooler from Ames. It was a PIA to install and I had to shim the bracket so the tank would clear the opening in the core support. Turns out the width of the tanks are wrong. There was a thread a while back discussing who sells the correct radiator. The moral of the story is: Don't buy a Desert Cooler
|
|
|
|
|
Joined: Mar 2012
Posts: 1,529 Likes: 41
Member
|
|
Member
Joined: Mar 2012
Posts: 1,529 Likes: 41 |
Strange thing is I have one in my car and it fits perfectly. I got mine back in 2006
Pontiac power
|
|
|
|
|
Joined: Sep 2001
Posts: 2,902
Senior Member
|
|
Senior Member
Joined: Sep 2001
Posts: 2,902 |
x2. Mine is an exact fit. I got mine somewhere also around 06.
|
|
|
|
|
Joined: Jan 2009
Posts: 3,049 Likes: 10
Senior Member
|
|
Senior Member
Joined: Jan 2009
Posts: 3,049 Likes: 10 |
Here's a thought, are you using the "well" nuts to fasten the radiator to the core support on the drivers side?
If not, get some before you reinstall the repaired or new radiator.
The "well" nuts allow for the expansion of the radiator, without them it adds extra stress on the core and tanks and you end up with cracks and leaks.
-Jeff
|
|
|
|
|
Joined: Jul 2011
Posts: 525
Member
|
|
Member
Joined: Jul 2011
Posts: 525 |
Good suggestion. Is this what you are referring to?
https://secure.amesperf.com/qilan/Detail_Web?part_num=FP195J&order_number_e=NDI0OTg5NQ%3D%3D%0A&web_access=Y
|
|
|
|
|
Joined: Jan 2009
Posts: 3,049 Likes: 10
Senior Member
|
|
Senior Member
Joined: Jan 2009
Posts: 3,049 Likes: 10 |
Good suggestion. Is this what you are referring to?
https://secure.amesperf.com/qilan/Detail_Web?part_num=FP195J&order_number_e=NDI0OTg5NQ%3D%3D%0A&web_access=Y Yup, Home Depot or Lowes carries them as well in there specialty fastener section.
-Jeff
|
|
|
|
|
Joined: Jul 2003
Posts: 4,248 Likes: 14
Premium Member
|
|
Premium Member
Joined: Jul 2003
Posts: 4,248 Likes: 14 |
Here is the Desert Cooler installed. Note the shims required to clear the opening. The tank is too wide.
Last edited by Bob S.; 01/26/17 12:44 AM.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,902
Senior Member
|
|
Senior Member
Joined: Sep 2001
Posts: 2,902 |
Something's up because it fits like socks on a rooster! Did you tell Ames about it?
The seam on my tanks sits in the same relation to the uprising opening on the core.
Measured from inside of the L bracket.
^Swiped your picture. I effen hate win-10! My best guess: 13/16” on mine.
^Bracket wraps around the tank, about 3 3/4” depending on how you hold your mouth.
You know what kind of hater I am, so I'm trying to blame it on installer error, but no dice on that one because I don't see how to get it closer, at least not yet;) Is the core a repro?
Throw those numbers at it, and report.
|
|
|
|
|
Joined: Jul 2003
Posts: 4,248 Likes: 14
Premium Member
|
|
Premium Member
Joined: Jul 2003
Posts: 4,248 Likes: 14 |
It's definitely wrong. The tank is too wide. In another thread, somebody else found the correct radiator with the narrower tank. Not sure if all Desert Coolers are wrong or I just got screwed. At the time I just assumed that's the way it was supposed to be and made it work. I won't mess with it until I have to replace it again, hopefully several years down the road. My point in this is to let people know to avoid the Desert Coolers or at least make sure they provide the right radiator.
|
|
|
|
|
Joined: Oct 2010
Posts: 310
Member
|
|
Member
Joined: Oct 2010
Posts: 310 |
Another radiator recommendation needed...
I have an original 1967 Pontiac Firebird 400 4BL MT non AC with original engine. The water runs hot (180-220) with 15 minutes of driving, so I’m thinking of replacing the radiator. The fan shroud, fan, spacer, etc. are all original and to specs. I don’t want to run an electric fan, so I’m looking for the best radiator out there that will hopefully bolt up without needing any modifications. Something close to original, but I’m willing to modify if keeps the temperature down. Any suggestions? Thanks!
1967 Pontiac Firebird 400 4 Speed Convertible 1973 Opel GT ![[Linked Image from i116.photobucket.com]](http://i116.photobucket.com/albums/o38/Lafann/13Firebird32_zpsc3472fae-1_zps1a9b372c-1_zps6cc6e08b.jpg)
|
|
|
|
|
Joined: Feb 2013
Posts: 3,220
Senior Member
|
|
Senior Member
Joined: Feb 2013
Posts: 3,220 |
I think we need to think about a few things. Pontiac 400 uses a 190 thermostat. It starts to open between 187-193 and fully open not to exceed 222. So that range is normal for these cast iron engines.
Did you check temperatures with a infrared thermometer or are you using a guage in the car that may be inaccurate?
|
|
|
|
|
Joined: Apr 2015
Posts: 608
Member
|
|
Member
Joined: Apr 2015
Posts: 608 |
|
|
|
|
|
Joined: Jan 2012
Posts: 1,202 Likes: 1
Member
|
|
Member
Joined: Jan 2012
Posts: 1,202 Likes: 1 |
X2 with what oldskool said! I have a Cold case and fit is PERFECT and you cant beat a 2 row with 1.25 wide tubes for cooling!
|
|
|
|
|
Joined: Jul 2006
Posts: 11
Member
|
|
Member
Joined: Jul 2006
Posts: 11 |
X2 with what oldskool said! I have a Cold case and fit is PERFECT and you cant beat a 2 row with 1.25 wide tubes for cooling! I think this is what I'm going to get...
'68 Firebird 400 Convertible
|
|
|
|
|
Joined: Jul 2003
Posts: 4,248 Likes: 14
Premium Member
|
|
Premium Member
Joined: Jul 2003
Posts: 4,248 Likes: 14 |
Let us know how it works out
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,862
| |
Most Online19,810
Feb 1st, 2026
|
|
|
0 members (),
410
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
