|
|
|
|
Joined: Sep 2020
Posts: 5
Member
|
|
Member
Joined: Sep 2020
Posts: 5 |
Wonder if anyone knows exactly where the outer wheel well attaches to the quarter panel? My car has detached outer wheel wells with new quarter panels so I’m not exactly sure where they are plug welded onto the quarter. Photos would be great, but basically I’m asking, are they flush with the quarter panel wheel opening or is there a margin? Thanks.
|
|
|
|
|
Joined: Sep 2013
Posts: 129
Premium Member
|
|
Premium Member
Joined: Sep 2013
Posts: 129 |
Wonder if anyone knows exactly where the outer wheel well attaches to the quarter panel? My car has detached outer wheel wells with new quarter panels so I’m not exactly sure where they are plug welded onto the quarter. Photos would be great, but basically I’m asking, are they flush with the quarter panel wheel opening or is there a margin? Thanks. Drill 5/16" holes in quarter panel lip about every 2-2 1/2" & plug weld.
|
|
|
|
|
Joined: Sep 2020
Posts: 5
Member
|
|
Member
Joined: Sep 2020
Posts: 5 |
Thank you for the information. Perhaps I’m asking the wrong question.
This is what I’m currently dealing with. A complete thief of a body shop installed new quarters onto my car and really butchered the inners and trunk extensions. My issue is when I do my mini tub and outer wheel well, I’m not exactly sure where they line up.
Basically, is where these outer wheel wells lining up correct or do they need moved? Thank you.
|
|
|
|
|
Joined: Sep 2013
Posts: 129
Premium Member
|
|
Premium Member
Joined: Sep 2013
Posts: 129 |
Thank you for the information. Perhaps I’m asking the wrong question.
This is what I’m currently dealing with. A complete thief of a body shop installed new quarters onto my car and really butchered the inners and trunk extensions. My issue is when I do my mini tub and outer wheel well, I’m not exactly sure where they line up.
Basically, is where these outer wheel wells lining up correct or do they need moved? Thank you.
Well in your pic it looks like the B-shop left the lip from the old qtr. panel, which was welded to the outer wheelhouse, then tried to attach it to the new qtr. panel. If I'm correct IMO replace the outer wheelhouse when you do your mini-tube install.
|
|
|
|
|
Joined: Sep 2020
Posts: 5
Member
|
|
Member
Joined: Sep 2020
Posts: 5 |
That’s what I’ve been doing. It’s a lot of work but one side is done. Thanks.
|
|
|
|
|
Joined: Sep 2013
Posts: 129
Premium Member
|
|
Premium Member
Joined: Sep 2013
Posts: 129 |
Detroit Speed mini tubs ?
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,861
| |
Most Online19,810
Feb 1st, 2026
|
|
|
0 members (),
2,110
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
