I am intersted to find out IF I had some of those made , is anyone interested?
I will try to find out if I can get them made in metal ,like the originals.

Bjorn, I am sure you could easily sell them on Ebay at the very least. Go for it. Just make sure you can keep your unit cost down as much as possible (obviously).

yes, probably...will try to see if someone can duplicate it first..

I AM very interested!! I´ll take one - that´s for sure! Count on me!

Thomas

Sign me up for at least three.

I'd be interested.

From own experience, I know that this part is sought for by nearly every first gen owner in this country, so I would probably be able to sell a couple, at the right price.

Count me in...like Snow Cruiser said, I would imagine that there would be a pretty good demand for a quality part.

Mike

I`ll go see "Carlos" today ,hope to get a positive answer, but Im not keeping my hopes up too high...

I'm interested

Saw Carlos last night, he lookedc it over, asked me to borrow it for a few days, he`s going to "study it"...let me know....

Interest here.

Bjorn,
That is certainly a sought after part and it would be great if a metal repro became available. Just recently I was able to obtain a good used baffle and have been restoring it. I will soon replace a fiberglass repro that's on my '68.
I wanted to point out that the parts catalog shows different part numbers for the '67-'68 (9789451) and the '69 (9796251) for the "valance/front panel to sheetmetal baffle". I don't know what differences there are between them but that may affect your project.
Jim

I'm in for a set!

Checked back with Carlos today......
its not going to happen.....

he wont be able to 'match it', its
way to complicated (w/o press and expensive dies) and to do a 'non original' version would not be worth it.....

Sorry , but I tried...