How exactly does this come out ? I see the bottom bolts I removed, I see two hard to reach bolts going thru the fender and valence on the side. But at the headlight section, what needs to be unbolted, pics would be great, thanks

There are two bolts behind the turn signals with difficult access - covered by the inner wheel house.

I do recall struggling to reach the one closest to the turn signal. This one bolts to the fender at the front most point if I recall correctly.

I don't recall if the turn signal was out when reaching in to gain access. That was 4 years ago, sorry. I might have a picture handy and I'll post if I do.

I remember now. I had to reach up thru the bottom to gain access to that screw near the front. Does this make sense?

The second one is down low and accessible.

Great thanks!