Dealer Service Information Bulletin 68-I-59 – Positioning of Inside Rear View Mirror – All
Bulletin 68-I-59 — Pontiac Motor Division Dealer Service Information Bulletin, Section 2, dated April 18, 1968. Attention: Service Manager.
Subject: Positioning of Inside Rear View Mirror — All Series.
Short answer: The 1968 mirror support has two ball sockets — one behind the mirror and one at the upper end of the bracket — allowing the entire assembly to swing fore, aft, and sideways. Many owners are unaware of this feature; dealers should inform customers who have difficulty positioning their mirror.
It has come to our attention that many owners apparently are not aware that the 1968 mirror support on all series has an exclusive feature consisting of a second ball socket at the upper end of the mirror bracket. This second ball socket allows the entire mirror bracket to swing fore and aft and sideways.
Coupled with the ball socket behind the mirror, this feature allows practically unlimited repositioning of the rear view mirror to any location necessary to please the most discriminating customers.
You may wish to convey this information to those customers who express concern over an inability to use the rear view mirror efficiently.
Content last modified: June 13, 2026 at 10:06 am
← Frequently Asked Questions
