You guys were right. The two front oil galley plugs were not installed. I put them in, threw it back together, and tested it with the drill and got 60 lbs of pressure. Thanks for the advice. Now if I can only get the distributor to seat all the way in I'll be running agian. I pulled the distributor to test the pressure with the drill and when I went to re-install it, it won't seat all the way in. I tried lining up the oil pump shaft with the distributor, but it still does'nt seem to go in all the way. It could be that I was working on it at 1:00 am..... I'll try again during the day time.
