Thanks Banshee.. I guess I should have mentioned that I already have both of those and have them printed out. But I still cannot see while holding the actual parts, how the hood pan will attach to the hood. The hood pan has 5 attachment holes, and I have 5 screws for it, but they do not line up with any holes in my hood. Im guessing that my hood being a repop, just does not have them in the correct place. So photos might help me judge better where to connect the pan. That is why I was looking for some actual photos if anyone has any. Its much easier to see with actual photos than 41 year old drawings with lines going all over the place... lol.
Also, I am still curious about the breather and the tube connecting it to the valve cover. I have the breather insert for my lower pan, and the clip to hold it on, but I do not have the "pipe" that feeds into the valve cover and was wondering if that particular attachment is necessary and what its actual purpose is.
