The glass looks good, Mark. Thanks for informing us about it.

If someone wanted to etch bird glass instead of the imprint, it's rather inexpensive to do. I think a bottle of Armour Etch is $10-15 a bottle. Then you can make your own stencil from Contact brand vinyl. I used to etch glass and mirrors but I used premade stencils. Never tried it making my own stencil with the vinyl. Clean glass with alcohol and let dry. I would recommend placing stencil on the glass while in the door so you know exactly where you want it. Just make sure to tape off the surrounding glass around the stencil well. I wouldn't recommend paper or anything thin. Etch the glass when it's laying flat and not vertical. Use rubber gloves and put the etching cream on. Let it sit for awhile. I usually let it sit a little longer than recommended. Wipe off with paper towels. Wash off area with water. Dry. Then peel off the stencil and tape. You might want to do some practice tries on small pieces of glass or mirror first.

Just make sure the stencil sticks in every spot especially on the edges or else the cream may leak under the stencil leaving an uneven edge. I'm not sure how etching will work on tinted glass.