1968 (build date December) Convertible with Factory Air-(not working)
When the engine is running the Gen Light is on and will not go out till the engine is off. The Alternator is putting out 13.6v +/- pending on the load. I believe the regulator is the problem as the Alternator is a new rebuild. The Regulator has a burnt look to the coil where the brown wire is connected to pin-4.
What I am having a problem with is when I push the relay on the regulator (pin-4) where the Brown/Gen Light wire is, I hear a relay making and breaking. The Gen Light goes off and on as I push this contact, I traced this to a relay on the inside of the driver side kick panel. The relay has a orange & red/white wire. I still have to disassemble the kick panel and remove the parking brake to inspect and follow these wires.
Any ideas to what this relay is? All the wiring diagrams are clueless to this relay and wire color code. It might be part of the A/C system as the car had factory A/C.
