The numbers (CPR 0422G2 and below DGW) are the numbers and letters that were physically stamped into the tube it's self. I can't find anything that matches up with any of the Axle Identification Codes on the Drivetrain ID Number page. Trying to figure out if it's the matching number rear end, and if it's a standard, or safe-t-track rear end. The PHS documentation wasn't the least bit helpful with much of anything, other than paint color codes, engine size, and upholstery. All of which I already knew from the cowl tag. Apparently a letter decoding the options (when necessary) wasn't all that "necessary" in my case. All I got were the bare basics. The decoding would have been nice.
The car is coming along nicely. Paint is done, and I'm starting reassembly now. Should have it completed and on the road by the end of August.
