A comment on the previous drawings that show the mounting of the black painted cast iron bracket. The drawings show the bracket being mounted with bolts to 2 cast tabs on the cylinder head. In reality the bracket mounts using the cylinder head bolts. I haven't removed the bolts to verify, but I think they must be longer than the other cylinder head bolts to account for the thickness of the bracket. The front-most one has a threaded stud on the end that the battery ground cable attaches to.
Also note that the A/C cars have a long upper dipstick tube that curves over the valve cover. It goes between the valve cover and the compressor when the compressor is in place. The one in the picture has a tab in the wrong location. The tab should be lower down on the tube and attaches to the front valve cover bolt.