I am told by someone who has already been through this exercise that the trunk emblem won't work because of the convex (or concave?) back profile of the usual trunk emblem. The flat back shape of the hood emblem is the way to go. And I don't need an NOS emblem. It just needs to be in good shape. This is a nice driver vert, not a trailer queen. Didn't mean to offend anyone here.
the trunk emblem works! here ! I installed it in 04 or 05....just make sure when you drill the holes for the studs that you miss the brace on the back of the spoiler by at least 1/4 " so you can put the nut on it...I didnt....but used one stud/nut and used silicone on the one right next to the brace...as you want the emblem to be just about centered of the the back up light in the tail light....but its installed so far down its almost flat...if you install it in the concave area it wont be seen right anyway! email me at bsefeldt@mhinc.com and i`ll send a picture...or I `ll put a picture in "Ramblings " for you https://firstgenfirebird.org/forums/ubbthreads.php?ubb=showflat&Number=249368&#Post249368 ....mine looks just like in your picture...and as you see , its leans to the right, meaning , if you use a hood embelem , you need one from a passengers side
