First off I have to thank everyone hear once again for their help...My car is finally coming together 6+ years later.
I recently installed the Autometer Gauges from Classic Dash (Look good but kinda a pain to install) and the only thing not working is the gas gauge.
I was told it has nothing to do with the gauge itself and is most likely the sending unit. when putting a meter on it...It was only giving off something like .5 ohms rather than reading 0-90 ohms which is what i was told it should be.
I was also told it was a common thing for the sending unit to go bad after all these year but I wasnt sure if I would need to replace the entire sending unit of just apart of it.
