Success!!! All done and it only took 2.5 hours. It couldnt have gone any smoother than it did, however, the driver side bushing bolts were in there hand tight! I wish I knew that before driving around in the car for 4 months. Fortunately, the pass side was tight. I did need to POR15 the mounts though, they were showing signs of surface rust and just did this for good measure. These however were not the original bushings, they had to be replaced before because there were repair panels welded in on the mounts. Dont know how old they were, but the bushings were shot! I didnt dis-assemble the rag joint, I just dropped the steering wheel down from the dash to allow it to move with the body, this worked really well. Thanks for everyones help in here, I couldnt have done it without you. I will post picutres Monday or Tuesday. Once again, thanks a million, you all rock!!!
