I'm trying to find some information on the Inner fender splash shield bracket seal. What does this seal look like and how is it installed on the bracket. This is the little bracket that get bolted to the inner fender brace.
I have both Inner fender splash shield brackets but can not find the seals. Do these attach to the fenderwell seal, that is attached to the inner fender?
Performance years shows one firewall to inner fender seal that comes in the engine compartment splash shield kit. but not sure if this attaches to the Inner fender splash shield bracket seal.
I just got the a-frame seal and the fenderwell seal installed.
I have the splash shield kit and it does only come with one firewall to inner fender shield. I was told it only goes on the driver side below the firewall electrical connector inboard side. But, i have seen diagrams where it shows both, one on each side. They connect at the firewall where your inner fenders connect to the firewall. I will try and find a pic to post for ya.
