They only have the two pieces on the right separate. They are not showing the one on the left only.
But I do not understand if the one on the left goes on this bracket, why do they only have one when the birds have two of these brackets. I thought they were suppose to cover the cowl body mount area.
Also with the size of that piece none of the survivors I've seen comes close to having that much rubber left.
That is a good question Harold, I have been wondering that myself. The assy manual shows the pass side on the drawing and does list both shields for the left and right side. It is hard to make out the part numbers cause the copies are so bad, but looks like the left side part number is 9792559 and right side is 9792558. This is for the 69 model, so I dont know if it is the same for a 67-68 models. One thing I will add, is that it looks like the drawings isnt showing the bracket and shield as a serperate item. I shows it as one item for each side and the part numbers I listed are called the shield assy.
