I can not really tell if the front one is correct from that angle. The attached picture I attached, the passenger front is the far left one.

They should not have bends like those. I would say someone bent them out to put on or take off the wires because it is almost impossible to do with out removing the bolt to the retainer. So someone just bent it out to gain access to the wires.


That bracket on the first picture, looks like a bracket that was under my oil filter housing on the block I removed. I asked someone about it and they thought it had to do with a bracket that held a cable or somthing for a automatic transmission. The block someone had added was coded for a automatic.