Need help with my tilt change! Have it instaled, everything works, signal lites,etc but when you turn the key to on the dash lights (gen and temp) come on but when you turn to starter, nothing!!! I have no test equipment so I am going to trailer car to shop when the weather allows. Its got me, everything seems to be ok but won't crank. Have a new ign switch and neut safety switch. Back up light work so i think those components are OK. I have tapped on the starter and solenoid and nothing. (this used to work on some older cars) There is a mystery wire tapped into the yellow wire on ign switch harness. It goes out under the hood somewhere?? Would appreciate your comments and suggestions. Thanks, Frank