Right before I sprayed, I put up some 4 mil plastic over stuff that needed covered.

Some work done today...car is covered with epoxy, got some color/clear on trunk/hood/cowl/lower baffle. Man, this has been a bit more involved than anticipated....the new T5 lights helped out with making things easier to see, but has drawn in the bugs and they fall right where they shouldn't. Also, trying to paint around the posts on the lift is troublesome. Not such an issue with the primers, but when it comes to the paint, I may have to rethink this. All in all, have so say I am pleased with work so far. Thye $15 HF paint gun I used for the primer has been flawless, as matter of fact, had a coupon for same gun for $9.99...so I got it just because. Getting better with laying down the color/clear. Again, using the $55 Pro gun kit from HF. I figure I will be a\ble to wet sand/buff the clear to where look as good as any shop would have done....