I am putting on an aftermarket fuel line and filter from the fuel pump to the carb and ran into a few plumbing/routing snags with the set-up I want to use. I think I have everything figured out, but my concern is that a portion of the metal fuel line leading from the carb touches ever so slightly the front of the intake manifold (see pic below, inside white circle). As some on this board already know, I am a complete amateur when it comes to this stuff, and I am learning as I go. Are there any problems I need to be concerned about in regard to the fuel line slightly touching the manifold? Or is this okay? As always, thanks for keeping me out of trouble!
