First Generation Firebird Forums Tech Help General Aftermarket Intake Manifold

Print Thread

Rate Thread

Re: Aftermarket Intake Manifold Paul M. #295497 01/27/15 07:43 PM
Joined: Apr 2013 Posts: 36 CA P Paul M. Member
Paul M. Member P Joined: Apr 2013 Posts: 36 CA	Yes the intake gaskets and the intake line up perfectly, neither however work on my engine/heads. I don't necessarily think it's an intake problem, as much as I believe it's the fact that the heads or the block have been machined so much that the intake also requires milling. So wether I switched to a stock intake or an aftermarket, at this point neither would fit.

Google AdSence Sponsor for FGF Forums

Entire Thread
Subject	Posted By	Posted
Aftermarket Intake Manifold	Paul M.	01/13/15 12:32 AM
Re: Aftermarket Intake Manifold	Bluebird428	01/13/15 04:56 AM
Re: Aftermarket Intake Manifold	USMC_Ordy	01/13/15 04:10 PM
Re: Aftermarket Intake Manifold	StealthBird	01/13/15 10:00 PM
Re: Aftermarket Intake Manifold	Region Warrior	01/13/15 10:06 PM
Re: Aftermarket Intake Manifold	Paul M.	01/14/15 01:49 AM
Re: Aftermarket Intake Manifold	Bluebird428	01/15/15 04:11 PM
Re: Aftermarket Intake Manifold	Paul M.	01/15/15 05:46 PM
Re: Aftermarket Intake Manifold	Bluebird428	01/16/15 04:50 PM
Re: Aftermarket Intake Manifold	salmon38	01/16/15 08:05 PM
Re: Aftermarket Intake Manifold	Paul M.	01/25/15 06:25 PM
Re: Aftermarket Intake Manifold	Bronze Bird	01/27/15 12:01 AM
Re: Aftermarket Intake Manifold	Paul M.	01/27/15 01:11 AM
Re: Aftermarket Intake Manifold	bigchief	01/27/15 06:21 AM
Re: Aftermarket Intake Manifold	Paul M.	01/27/15 10:06 AM
Re: Aftermarket Intake Manifold	Gus68	01/27/15 07:35 PM
Re: Aftermarket Intake Manifold	Sleddog	01/27/15 07:45 PM
Re: Aftermarket Intake Manifold	bigchief	01/27/15 06:07 PM
Re: Aftermarket Intake Manifold	Paul M.	01/27/15 11:43 PM