Ok. I'm having an issue with my starter wiring. I have a summit high torque mini starter. I mounted an external solenoid on the fire wall to help with hot starts... it still turns over slow however.... anyways. I have the positive cable running from the battery to one side of the solenoid..and then from the opposite side to the starter... the s terminal is hooked to the ignition and the small and big post on the starter have a jumper together.... . I was just replacing the starter on my 77 vette. Same parts but the positive cable is hooked directly to the starter on the vette.. the s terminal goes to the ignition and the small post on the starter is hooked to One of the big posts on the solenoid mounted on the firewall... it's always started fine. Is this wrong? A better way to wire it than the way I did the bird???