Thanks, I’ve learned quite a bit doing it all myself. Had to redo a few things, but nothing major.
I have been spraying the paint outside... I purposely aimed for this time of year because geographically it’s low humidity, no bugs, and gets warm enough for paint to flash properly. It doesn’t drop in temp too low so condensation isn’t that bad but I did find that setting the clearcoated parts in the garage overnight prevented hazing. I had a little on the fender I left out but the door I set inside turned out perfect. Basically the moisture drew into the outer layer of clear and I was able to cut and buff it out.
If I ever do this again I’ll rent a booth, but I’ve done everything in my driveway so far and I’m going to see it through even if it means more sanding and buffing...
I’m hoping to have the paint done by this Wednesday and my goal is to have it on the road by late March/early April.