I spent the past 2 days putting together the front end. I have attached 2 pics. The close-up shows the disk brakes. There are 4 bolts that hold everything together. One of the 2 lower bolts is too long and will have to be cut off so it does not hit the support for the sway bar. One of the upper bolts is too short and does not reach the locking part of the lock nut. The other pic shows the mostly completed front suspension. I still have to install the steering linkage, the grease fittings, and pump some grease into all the fittings. Then I'm off to do some welding; I need to fix a hole or two in the floor pan, fix the shifter cutout (a previous owner made it bigger), and replace the trunk floor.