Thanks, to me it looks like all of the OE pumps are coming in around the 15 sec mark. All of my wiring, hardware, linkage, etc are either new or rebuilt. I found a used OE motor on ebay, albeit I found the pump gear frozen and rusty when I disassembled it. My hope is to rebuild an OE pump/motor and install it and run the same test via my lab scope and time it also and see it that made a difference. If I disassemble the new pump I will also be able to tell if the skimped on the motor winding count or if something else is significantly different. It stinks because my intention was never to relinquish my OE motor when the top shop installed it. I expected to get it back since, IMO, it worked fine...just the lines and ram really needed a replacing.