I am taking a step towards getting rid of my Glasspaks* and re route my exh pipes, not because I dont like them ,but because the former owner ran the pipes straight back under the body , not in the tunnel ...and after lowering the car I get scraping..the glasspaks themselves are too far forward and gets crunched..

my question is this...
would I be better off running just the transverse muffler behind the axle,with flowmaster or dynomax, or just have the two in front of the axle?
my thinking is that just running transverse would give most clearance...
and it should not be louder than the glasspaks , I assume with just the transverse...
what am I thinking wrong, if anything?

if you look at my car on the pic below (online show) you can see where the glaspaks are low, right under the center...you can also see the shadow line of the pipe hanging under all the way from the front...

* probably going to the 'muffler man' this saturday to get it done.