Okay, I got me an air compressor and some tools for that. My brother is sending me an engine hoist and lift next week. I got the **** passenger fender off and unloaded about 5 pounds of dirt and leaves from behind the firewall (through a 3 inch hole no less!) Now I need a MIG welder. A client of mine that used to be an electrician said that the smallest Craftsman unit I could get would work fine for body work and floor pans and such, as long as I wasn't trying to weld anything too thick. I was at a Tractor Supply Company today and found this:

http://www.mytscstore.com/detail.as...;sonID=600&page=1&productID=8957

I need to know if that will do what I need it to do and was looking for some advice. I am anxious to start doing some actual restoration on the car but I need all the tools first.

Later,
Zappa1