Well Dennis and I went at it again tonight. Here is what we know is NOT the problem: 1. MC is good. We removed the new one and put the one Dennis had on his car (that we know works) on mine. 2. The drums are all adjusted well 3. All cylinders are ok and the plundgers are ok 4. There are no leaks anywhere 5. The soft lines are not buldging at all 6. Bleeder screw are ok 7. We un-screwed the MC a bit too to allow the rod to fully retract and this didnt help
We still have no pedal and it appears that we are getting air into the system somehow, or havent chased it all out. The only other item that we havent been able to check out is the distribution block. Can that cause an issue of a soft pedal like this? Does someone have on that I can get?
