Make your appointment with your chiropractor before you start because this won't be a comfortable job. I dropped the ashtray and the wood decorated bezel first. The bezel fastens at the bottom with screws and hooks over hidden plastic a retainer strip at the top. There is a fiber optic light pipe to light the ashtray, so be careful not to hurt that part. There is an escutchen plate that comes loose when you remove the knobs and 7/16 "pot nuts". Use a deep socket or deep nut driver for them. There are two more screws through the "sub-dash" into the front of the radio and you won't see them until you drop the wood grain dash escutcheon. One more bracket supports the right rear corner of the radio. There is also the antenna and power/speaker jacks. The power/speaker might latch in, I forget now. Don't force if there is a catch.