I have a 1969 FGF 350 2bbl, Auto, non air car. We have completed most all and NOW we have some engine issues. I have a lower end knock that I believe is the rod, a carb issue, coil and ignition issue to state a few problems. Compression is good at 160-165. It runs very ruogh and now need to use both feet while driivng. I have spoken to the previous owner and have the car documented back to 1978 with no major engine work done. I really do not want to keep throwing money at the engine and believe that I should just rebiuld the engine. I do not want to drop a chevy in her.
I live in the SF Bay Area and was planning on having Diablo Engine and Machine do the work but found out today that they are no longer in business after 45 years. They were reasonable at $1900.00 for the rebuild plus $1000.00 to pull and reinstall. Thats a few buck! If I was handy in the engine compartment I'd do it myself but have never done a rebuild.
What do you all think? Do any of you know of a rebuilder in the area that is reasonable or any other ideas to help with my decision.
