It's been sitting for about 15 years. A flat right front from time to time I'd pump up but it'd leak down again. So it sat cockeyed sometimes for weeks or months.
New tires, same size all around, but now it sits uneven, mostly visable in the rear. Leans to the right with to much tire clearence on the drivers side. Didn't sit that way when I parked it. Almost like the right side springs are shot. So I put jack stands under the front frame and two more on the rear frame at the rear spring perches to let the suspension hang free to see if maybe it was just the shocks binding. Well the left rear frame rail never touched the jack stand, about an inch off. It was sitting on three points. Nice to know the car is that stiff but... No damage I can find, body bushing seem fine, no structual rust. Only thing I see wrong is the X-brace is missing.
Any suggestions?
Wanting a Custom fit in an off the rack world.
I don't have time for a job, I just need the money.
