I know the first gen site has the info for ride height on the 67/68's. Does anyone know where i can find the same info for a 69' coupe?

Thanks!

I'm gonna go out on a limb and say Vikki probably has this info, If not she can point you in the right direction.

It should be the same as 67-68. Same suspension ect.

For '69:
Curb rocker panel height front (33" behind front wheel centerline): 8.60"

Curb rocker panel height rear (20" forward of rear axle centerline): 8.20"

Full fuel tank, specified tire pressure, standard equipment springs.

'68 measures 8.40" and 8.11" at the same points.

So there's about an 1/8 of an inch difference between 67-68 and 69. Not very much to measure and almost impossible to notice. I'm going to have to check that for fun and see if I nailed it. Those measurements sound close.... Little bit lower in back than in front.

I just checked out my 69 vert for the fun of it and I get @ 7" rocker panel height behind the front wheel and @ 8" in front of the back wheel. I used all stock components.

Mine is sitting like this; just about right--huh?

What's that, a 195/75R14?

Dey be winter sneakers. Christine doesn't do dress shoes unless she's going outside.