|
|
Joined: Oct 2006
Posts: 2,421
Member
|
|
Member
Joined: Oct 2006
Posts: 2,421 |
Installed the long branch manifold this weekend. After checking the adapter gasket to block (perfect) I checked the gasket to the RARE adapter.
Not exactly a perfect fit. This would restrict oil flow quite a bit.
Wanting a Custom fit in an off the rack world. I don't have time for a job, I just need the money. 
|
|
|
|
|
Joined: Jan 2002
Posts: 7,719
Power Member
|
|
Power Member
Joined: Jan 2002
Posts: 7,719 |
2012 Mustang Boss 302 #1918, Competition Orange. FGF replacement
2006 Mustang V6 Pony, Vista Blue. Factory ordered.
2019 BMW X3 (Titled to the wife, but I'm always driving it for her. So I'm claiming it)
Old projects, gone but not forgotten:
1967 FB 400, original CA car. After 22 years of work, trashed by the guy who was supposed to paint it. I had to sell it.
1980 Turbo Trans Am
1970 Mustang fastback, 351C 4Bbl, auto
1988 Mustang GT, 5 speed
1983 F-150 4x4, built 302
1994 Chevy K2500 HD 4x4, 454 TBI
|
|
|
|
|
Joined: Dec 2005
Posts: 5,108
Power Member
|
|
Power Member
Joined: Dec 2005
Posts: 5,108 |
Opening it up is a good idea.
But oil will be hitting the block where the gasket covers the hole.
May cause turbulance.
I'd find a better casting.
|
|
|
|
|
Joined: Feb 2005
Posts: 1,219
Member
|
|
Member
Joined: Feb 2005
Posts: 1,219 |
To get my adaptor to seal I had to go to a slightly softer gasket material.
Cheers,
Scott
|
|
|
|
|
Joined: Aug 2002
Posts: 7,495 Likes: 1
Premium Member
|
|
Premium Member
Joined: Aug 2002
Posts: 7,495 Likes: 1 |
Depends on which way the oil flows through that port.
Robert
|
|
|
|
|
Joined: Oct 2003
Posts: 1,770
Member
|
|
Member
Joined: Oct 2003
Posts: 1,770 |
I think oil is flowing diagonally, and the hole is the same. Trim the gasket, but what I did was like Smitty did.
Use a better material. The material they provide is for [censored]. You can buy stuff by the roll at the auto parts stores. Just make sure it's for oil applications. and cut out your profile.
Believe me, the material they provide is really bad. I had to redo it with the better material, and a tip from a pro... skim coat the gasket material and let it stand until the outer surface is dry. This will give you a soft sealing surface and a better seal. It will also help keep things in place as your trying to put it back together.
Good luck.
1969 Firebird conv't A/C 400 4-Speed
|
|
|
|
|
Joined: Jul 2003
Posts: 4,248 Likes: 14
Premium Member
|
|
Premium Member
Joined: Jul 2003
Posts: 4,248 Likes: 14 |
Also beware of the bolts being too long and bottoming out. I had that problem with the Ames one and it leaked until I added washers.
|
|
|
|
|
Joined: Nov 2006
Posts: 6,341
Power Member
|
|
Power Member
Joined: Nov 2006
Posts: 6,341 |
I ordered and installed the entire set up from RARE and had no issues with the gaskets and or leaking etc...
|
|
|
|
|
Joined: Sep 2001
Posts: 14,265
Valued Mentor
|
|
Valued Mentor
Joined: Sep 2001
Posts: 14,265 |
A local guy(to me) has some of those on eBay(originals). He even includes the bolts.....
|
|
|
|
|
Joined: Oct 2006
Posts: 2,421
Member
|
|
Member
Joined: Oct 2006
Posts: 2,421 |
RARE says mine's defective and is sending me a new one.
We'll see.
Wanting a Custom fit in an off the rack world. I don't have time for a job, I just need the money.
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,861
| |
Most Online19,810
Feb 1st, 2026
|
|
|
2 members (Geoff, Jimc2002),
469
guests, and
119
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
